<tr></tr>

  • <address id="NRouZ4"></address>

  • <dl><small></small></dl>

  • <tt><del></del></tt>

    <td id="NRouZ4"></td>

        1. MT10 SDI-12 Output Soil Temperature And Moisture Sensor

          We designed the MT-10 to measure the water content, electrical conductivity, and temperature of soil. The MT-10 uses an oscillator running at 70 MHz to measure the dielectric permittivity of soil to determine the water content. A thermistor in thermal contact with the sensor prongs provides the soil temperature. The Polyurethane coating on the MT-10 circuit board protects the components from water damage and gives the sensor a longer life span.
          Description

          Product Description:

          Name:MT10 SDI-12 Output Soil Temperature And Moisture Sensor

          Type:BND-MT10

          We designed the MT-10 to measure the water content, electrical conductivity, and temperature of soil. The MT-10 uses an oscillator running at 70 MHz to measure the dielectric permittivity of soil to determine the water content. A thermistor in thermal contact with the sensor prongs provides the soil temperature. The Polyurethane coating on the MT-10 circuit board protects the components from water damage and gives the sensor a longer life span.


          Specifications

          Volumetric Water Content

          Range: 0 (air) to 100 (water)


          Temperature

          Range: -40 to 80 ℃

          Resolution: 0.01 ℃

          Accuracy:±0.5 ℃


          General

          Dimensions: 10 cm (1) x 3.2 cm (w) x 0.7 cm (d)

          Prong Length: 5.2 cm

          Dielectric Measurement Frequency: 70 MHz

          Measurement Time: 150 ms (milliseconds)

          Power requirements: 3.6 to 30 VDC, 0.3mA quiescent, 10mA during 150 ms measurement


          Output: SDI-12 / RS485 MODBUS RTU

          Operating Temperature: -40 to 80 ℃

          Connector Types: 3.5 mm (stereo) plug or stripped & tinned lead wires (Pigtail)

          Cable Length: 5 m standard; Maximum 75 m. Please contact if you need longer cable lengths.


          PHYSICAL CHARACTERISTICS

          SENSOR NAME

          MT10

          DIMENSIONS

          10 cm X 3.2 cm

          CABLE LENGTH

          5 meters

          * Custom cable lengths are available for an additional cost.


          Type Selections

          Code number

          Code

          Code info.

          Code1:model

          MT10


          Code2:Measurement parameters

          A

          B

          Soil moisture, Soil temperature(SDI-12)

          Soil moisture, Soil temperature, soil electrical conductivity (EC). Three parameter measurement(RS485 ONLY)

          Code3:

          Soil moisture range

          A

          0-100%

          Code4:

          Electrical conductivity range(RS485 ONLY)

          A

          B

          C

          D

          0-5000us/cm (RS485 ONLY)

          0-10000us/cm(RS485 ONLY)

          0-20000us/cm(RS485 ONLY)

          NONE

          Code5:

          CONNECTION TYPES

          A

          B

          PIGTAIL CABLE

          STEREO CABLE (SDI-12 ONLY)

          Code6:Output

          A

          B

          SDI-12

          RS485 MODBUS RTU

          Code 7:cable lengths

          005

          XXX

          5 meters

          Custom, XXX is an arbitrary length (unit: m)

          Model example:

          MT10 Sensor, Soil moisture, Soil temperature, soil moisture range is 0-100%, interface SDI-12, connection type is STEREO CABLE, 5 meters cable length.

          Type selection code:MT10 - A A D B A 005

          XxiFn

          <tr></tr>

        2. <address id="NRouZ4"></address>

        3. <dl><small></small></dl>

        4. <tt><del></del></tt>

          <td id="NRouZ4"></td>